614.771.0213
 |
|
 |
|
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Encoder
Benefits • IP67 rating (completely
sealed)• Withstands dust, dirt, oil and
other harshenvironmental
conditions• No mechanical wear characteristics• No more broken or scratched
glass scale• Requires no cleaning or maintenance• No air purge required • Tolerant to shock, vibration and
magnetic interference• Easy installation, no machined
surface or backerbar
needed |
| A
company of Schneider Electric |
| > | Digital Readouts | > | DRO System Encoders |
Spherosyn & Microsyn
Linear Feedback Encoders
. . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . .
Consistent accuracy and reliability
even under the harshest shop conditions.
Designed to work exclusively with
Newall's digital readouts, the Spherosyn™ and Microsyn™ encoders
embody a truly innovative design in which
all of the electronics and measuring components
are sealed and protected. The encoders
carry an IP67
environmental rating and will continue
to provide accurate, reliable readings
even when fully submersed in water, oil
or coolant. No other linear encoder matches
the durability and reliability of Newall's
reader heads and scales.
Spherosyn™ |
Microsyn
10™ |
Microsyn
5™ |
|
| Output Signal | 2.0V ±0.5ms,
1kHz phase analogue, 360° / 12.7mm |
||
| Accuracy/Meter | ±0.0004" (±10µm) |
±0.0002" (±5µm) |
|
| Repeatability | Within 1 (one)
resolution count |
||
| Resolutions | 0.0005" / 0.0002" (0.01mm / 0.005mm) |
0.0005" /
0.0002" / 0.0001" / 0.00005" (0.01mm / 0.005mm / 0.002mm / 0.001mm ) |
|
| Maximum Traverse Rate | 4,800" (120m)
/ minute |
1,800" (45m)
/ minute |
|
| Power Supply | 12VDC ±5%, <180mA |
||
| Shock (11ms) | 100g / 980m/sec-2
(IEC 69-2-6) |
||
| Vibration (55-2000Hz) | 30g / 294m/sec-2
(IEC 68-2-27) |
||
| Scale Travels | 2" to 462" (51mm to 11.7m) |
2" to 40" (51mm
to 1016mm) |
|
| Environmental Rating | IP67 (completely
sealed - fully submersible) |
||
| Operating Temperature | 32° to
131°F (0° to 55°C) |
||
| Coefficient of Expansion | 12 x 10-6K |
||
| Scale Material | 316 stainless
steel |
Carbon fiber |
|
| Scale Diameter | 0.601" (15.25mm) |
0.257" (6.5mm) |
|
| Overall Scale Length | Scale Travel
Length + 10" (254mm) |
Scale Travel
Length + 7" (178mm) |
|
| Encoder Dimensions | 2.04"H
x 5.16"L x 1.10"D (52 x 131 x 28mm) |
1.38"H
x 2.95"L x 0.98"D (35 x 75 24mm) |
|
| Standard Cable | 9 core, 11.5'
(3.5m) stainless steel armored |
||
| Maximum Cable Length | 65' (20m) |
||
| Standard Connector | 9 pin "D" |
||
| EMC Compliance | BS EN 50081-2,
BS EN 61000-6-2 |
||
Quick and Easy Installation
The design of these linear encoders allow installment
in almost any position, unlike glass-scale linear encoders, which usually
need to be installed with the lip seal facing downwards to prevent contamination.
Self-aligning fixing brackets allow virtually effortless scale mounting,
needing only a single hole for each set of brackets.
Click HERE to
download PDF information sheet (103k).