800.229.4376
614.771.0213
614.771.0213
 |
|
 |
|
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
| A
company of Schneider Electric |
| > | Linear Encoders | > | Incremental Linear Encoders | SCC-100 Converter |
SCC-100 Converter
. . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . .
(Standard Performance)
The SCC-100 takes
the TTL differential quadrature signals from the MHG-VV, MHG-VM, SHG-VV
and SHG-VM linear encoders and converts it to an analog sine/cosine
output. This unit provides conversion to both ~1Vpp and ~11µApp
standards. A digital reference marker signal is provided.
Specifications |
|---|
Output Signal |
TTL differential quadrature |
|---|---|
Output Signal (sinusoidal voltage) |
~1Vpp differential (MHG-VV, SHG-VV)
and ~11µApp differential (MHG-VM, SHG-VM) |
Amplitude Ratio (A to
B) |
0.95 to 1.05 |
Phase Angle |
90° ±5° elec |
Output Resolution |
20µm or 40µm (MHG only)
signal period |
Reference Mark Signal |
Periodic |
Reference Mark Zero Crossover Point |
±90° ±5° elec |
Reference Mark Signal
Levels |
0.8 to 1.2Vpp (typically 1Vpp)* |
Power Requirements |
5VDC ±5%, <290mA (with
encoder) |
Overall Dimensions |
113mm x 44mm x 41mm |
. .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . .