Linear Encoder - Incremental Linear Encoders - SHG-VS

800.229.4376
614.771.0213

• Incremental Encoders
• SHG-TT
• MHG-TT
• SHG-TS
• SHG-VV & SHG-VM
• MHG-VV & MHG-VM
• SHG-VP
• MHG-VP
• SHG-VS
• Absolute Encoders
• Distance Coded Encoders
• SCC-200

• Installation Manual (457k)
• Protocol Document (280k)
• SCC-200 Datasheet (820k)
• Dimensional Drawing >100"
• Dimensional Drawing <100"
• Feature Comparison Chart
• Technology Guide (975k)
• Downloadable Technical
Documents
• Certifications & Ratings
• How They Work

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Encoder Benefits
• IP67 rating

(completely sealed)
• Withstands dust, dirt, oil

and other harsh

environmental conditions
• No mechanical wear

characteristics
• No more broken or

scratched glass scale
• Requires no cleaning or

maintenance
• No air purge required
• Tolerant to shock, vibration

and magnetic interference
• Easy installation, no

machined surface or backer

bar needed

Incremental Linear Encoders

SHG-VS

SHG-VS Linear Encoder
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

The SHG-VS linear encoder is intended for use with the SCC-200 converter. The SCC-200 will output a ~1Vpp sine/cosine signal with a single reference marker. It has
a series of four selectable reference markers spaced every 25.4mm. Which reference selected for the output reference is dependent on the rotational alignment of the scale relative to the reader head upon installation.

Specifications

Output Signal	~1Vpp from SCC-200 converter
Accuracy/Meter	±0.0004" (±10µm)
Resolution from the SCC-200	20µm signal period
Scale Travels	2" to 462" (51mm to 11.73m)
Scale Diameter	0.601" (15.25mm)
Reader Head Dimensions	2.05"H x 5.16"L x 1.10"D (52mm x 131mm x 28mm)
Reference Marker	Single (select 1 of 4)
Power Supply	5VDC ±5%, <300mA (with SCC-200)
Shock (11ms)	100g (IEC 69-2-6)
Vibration (55-2000Hz)	30g (IEC 68-2-27)
Sample Period	100µs
Environmental Rating	IP67, fully submersible (IEC 529) - Exceeds NEMA 6
Operating Temperature	32° to 131°F (0° to 55°C)
Coefficient of Expansion	12 x 10^-6K
Scale Material	316 stainless steel
Overall Scale Length	Scale travel length + 10.2" (258mm)
Standard Cable	9 core, 11.5' (3.5m) armored
Maximum Cable Length	82' (25m)
Standard Connector	9 pin "D" type
EMC Compliance	BS EN 50081-2 and BS EN 61000-6-2

Options

Resolutions	Custom resolutions available
Non-Armored Cable	PUR (polyurethane)
Connectors	• Honda PCR-E20FS (Fanuc) • IP67 (NEMA 6) • None (flying lead)
Cable Lengths	22' (7m) or 19.68" (0.5m)

Quick and Easy Installation
The design of these linear encoders allow installment in almost any position, unlike glass-scale linear encoders, which usually need to be installed with the lip seal facing downwards to prevent contamination. Self-aligning fixing brackets allow virtually effortless scale mounting, needing only a single hole for each set of brackets.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

SHG-VS Linear Encoder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

SHG-VS Linear Encoder
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .