PRODUCT SPOTLIGHT
Replace Broken Glass Scales with DSG/DMG
Many shops will be will more willing to replace a single defective scale on an existing DRO vs. replacing the entire system, if that will get them up and running. Newall's DSG and DMG ...

Many shops will be will more willing to replace a single defective scale on an existing DRO vs. replacing the entire system, if that will get them up and running. Newall's DSG and DMG ...
NEWALL NEWS
There are currently no events.
APPLICATION STORY
Newall Helps Improve Performance MJC Engineering
MJC Engineering and Technology, Inc., Huntington Beach, CA, is a world leading builder of CNC spin forming machines, typically used for tube spinning and steel and aluminum pressure vessel productio...

MJC Engineering and Technology, Inc., Huntington Beach, CA, is a world leading builder of CNC spin forming machines, typically used for tube spinning and steel and aluminum pressure vessel productio...
Incremental Feedback Encoders for CNC/PLC: SHG-VP Linear Encoder
SHG-VP Linear Encoder
The SHG-VP linear encoder is intended for use with the SCC-200 module. The SCC-200 will output a ~1Vpp sine/cosine signal with a periodic reference marker.
Click here to learn more about Newall's Inductive Encoder Technology.
Download SHG-VP Linear Encoder Documents: SCC-200 Datasheet (pdf)Dimensional Drawing (<100" travel) (pdf)
Dimensional Drawing (≥100" travel) (pdf)
Installation Manual (pdf)
Newall Linear Encoder Catalog (Newall Linear Encoder Catalog)
Specifications
|
---|
Output Signal
|
~1Vpp sinusoidal from SCC-200 converter
|
---|---|
Accuracy/Meter
|
±0.0004" (±10µm)
|
Resolution from the SCC-200
|
20µm signal period
|
Scale Travels
|
2" to 462" (51mm to 11.73m) — Travels over 462" available
|
Scale Diameter
|
0.601" (15.25mm)
|
Reader Head Dimensions
|
2.05"H x 5.16"L x 1.10"D (52mm x 131mm x 28mm)
|
Reference Marker
|
Every 0.5" (12.7mm)
|
Power Supply
|
5VDC ±5%, <300mA (with SCC-200)
|
Shock (11ms)
|
100g (IEC 69-2-6)
|
Vibration (55-2000Hz)
|
30g (IEC 68-2-27)
|
Sample Period
|
100µs
|
Environmental Rating
|
IP67, fully submersible (IEC 529) - Exceeds NEMA 6
|
Operating Temperature
|
32° to 131°F (0° to 55°C)
|
Coefficient of Expansion
|
12 x 10-6K
|
Scale Material
|
316 stainless steel
|
Overall Scale Length
|
Scale travel length + 10.2" (258mm)
|
Standard Cable
|
9 core, 11.5' (3.5m) armored
|
Maximum Cable Length
|
72.2' (22m)
|
Standard Connector
|
9 pin "D" type
|
EMC Compliance
|
BS EN 50081-2 and BS EN 61000-6-2
|
Options
|
---|
Resolutions
|
Custom resolutions available
|
---|---|
Non-Armored Cable
|
PUR (polyurethane)
|
Connectors
|
• Honda PCR-E20FS (Fanuc)
• IP67 (NEMA 6) • None (flying lead) |
Cable Lengths
|
22' (7m) or 19.68" (0.5m)
|
Quick and Easy Installation
The design of these linear encoders allow installment in almost any position, unlike glass-scale linear encoders, which usually need to be installed with the lip seal facing downwards to prevent contamination. Self-aligning fixing brackets allow virtually effortless scale mounting, needing only a single hole for each set of brackets.