The MCG-TT linear encoder provides an ultra-low encoder profile for restricted spaces without the need to sacrifice performance or environmental robustness. Having a cylindrical shape the MCG rea...
Metlsaw Systems Inc., Benicia, CA, is a manufacturer of plate, cut off, extrusion, cold and combination saws for industrial metalworking and plastics production applications. Spanning a multitude of...
Digital Readout System Troubleshooting
One page troubleshooting guides are available for our Digital Readout Systems. Select the display model below to download and print the appropriate troubleshooting guide.
|
One Page Troubleshooting Guides |
File |
Size |
|
For display models: A50, C70, C80, DP700 |
26k |
|
|
For display models: Sapphire, DP7, DPG, Topaz, DP8, DPG2000, E70 |
26k |
Once troubleshooting has been completed, contact our Tech Support Department with the serial number of the part that needs replaced.
Digital Readout System FAQ's
My Digital Readout System is not scaling properly.
This is easily solved by setting the encoder type parameter to match the type of encoder that is being used. The Digital Readout manual provides detailed instructions on parameter setup.
My Digital Readout is reading double or half of actual movement
This is likely caused by incorrect setting of the Radius / Diameter parameter. The Digital Readout manual provides detailed instructions on parameter setup.
Where can I find the serial number on my Spherosyn or Microsyn reader head?
The serial number is engraved in the reader head. See photos below.
Spherosyn and Microsyn
Spherosyn 2G
